MGC 3.0L 6CYL BMC-C 1.5:1 R/R

Pro Street - MGC GTS / BMC C-Series 3 LITRE Inline 6 Pro Street 5/16" Rockers, Ratio 1.5 ADJ YT 6800

Designed for high revving street/strip applications. No other comparable product can compete with 600lbs* maximum open spring pressure whilst retaining factory size bolt-down hardware.

Manufactured and assembled in Australia using the highest quality materials and componentry consistent with those found in our Platinum race series.

Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift.

Ideal for harsh street and strip applications, these rockers have got what it takes to last!

Why Choose Pro Street?

• Built to withstand 600lbs* max open spring pressure
• Oversize full-complement caged bearings designed for oscillating (rocking) loads, paired with oversize precision ground trunnions to reduce friction.
• Intricately balanced CNC billet arms ensuring vital valvetrain stability - focusing attention on the harmony of the entire engine.
• Extruded from aircraft grade aluminium, perfect for dissipating excess top-end heat.
• Various ratios available, catering for every camshaft grind. High ratios allow for additional lift on stock and aftermarket camshafts.
• Chrome moly steel hardened and ground roller tips of generous diameter (positively retained by internal circlip) preventing abrasion of valve tips and guides commonly seen with non-roller tip rockers. Allows for smoother, quieter operation. Maintains lash and reduces necessary and tedious engine maintenance.

Key Features:

• New CNC Machined PRO STREET rocker body for added strength in Hi-RPM Applications 1.5 Ratio
• Tool steel Pin & Roller
• Torrington BEARINGS
• Chrome Moly Cup lash adjustment screws with Blackened 12 Point Nuts - To suit Ball end Pushrods
• Channel pressurised oil through the Rocker Mounting Plate for optimum Lubrication 
• Each adjuster is broached for a big 3/16" socket to eliminate twisted hex keys.
• Larger diameter shafts are made from 4130 steel, deep case hardened and tempered for maximum wear resistance and strength.
• Aluminum rocker bodies use new 2000 aluminum made to our specifications for improved tensile and yield strength, and increased notch sensitivity, fatigue resistance, strength at elevated temperatures and chemical resistance.

Kit contains:

- 12 all new 1.5 Ratio PRO STREET arms Fully assembled with X Hole HD Lash adjusters & 12 Point Nuts, Torrington Bearings, and specifically ground Roller Tips

- Model specific Rocker Mounting Cradle with Oil Channel machined through for pressurized lubrication 

- Blackened Spacers & Washers to complete the assembly

-Assembled and ready for pre-lubrication and installation. 

PLEASE NOTE: The YT 6800 Rocker System has been designed to be used with BALL-END Pushrods.

Requires Head studs / Bolts to completely secure the Cradle system. Recommended to be installed by an Engine Builder with Valvetrain experience. May require Modifications to suit.

Tech Spec - Total system includes cradle, shafts and arms.