RUBBER VALVE COVER SPACER GASKET KIT TO SUIT LS ENGINES.
When fitting YT Hydraulic Rockers to LS1, LS2, LS3, LS7 & LSX based engines, the oil baffle inside the factory valve cover may obstruct the rocker and additional clearance is required. The YT 5132 rubber valve cover spacer kit will raise the valVe cover approximately 8-10mm, which provide the required clearance and allows the use of factory valve covers.
Kit contains:
- VALVE COVER SPACER GASKETS (PAIR)
- HEX HEAD NUTS (7)
| PART NO | YT 5132 |
| MAKE | CHEVROLET/HOLDEN |
| MODEL | VARIOUS LS ENGINES |
| SERIES | N/A |
| ENGINE | LS1, LS2, LS3, LS7, LSX |
| YEAR | 1999-Current |
| PART TYPE | VALVE COVER SPACER GASKET (PAIR) |
| THICKNESS | 10mm |
-
No Leak Gaskets
Gaskets can be your best friend or your worst enemy . These YellaTerra gaskets are definitely in your best friend category . Had them on my daily driven VE SS 6.0L Commodore for a few years now . After fitting a new cam Lifters and some YellaTerra shaft mount rockers there was definitely no room left between the rockers and the stock valve covers . These gaskets came with the rocker kit and when fitted as per the instructions they provided ample clearance for my application . The test was driving the car every day and no leaks as I said for a few years . The only reason I have replaced the old YellaTerra gaskets was a rebuild on the 6.0L the new set fit just as good as the old set . These are quality gaskets not a make do fix and they last longer than the stock factory gaskets another spot on YellaTerra part .
-
Brilliant!
Easy to fit! Cleared my aftermarket roller rockers & made the job easy as! Definitely recommend!
