NOW AVAILABLE!
Introducing the Slant 6 Chrysler Platinum 1.5:1 Ratio Roller Rockers.
Premium Performance Roller Rockers designed specially for Shaft Mount applications using our very own 2 piece Shaft manufactured in house.
YellaTerra Platinum Race Rockers - The ultimate performance rockers for Chrysler Slant 6's
Designed for strength, built to race. No other rocker system compares with Yella Terra Platinum race series. Manufactured and assembled in Australia using the highest quality materials and componentry sourced locally and from the USA.
Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft ... A trend many engine builders and racers alike are adopting to relieve the inertia on lifters and push rods generated by aggressive and often violent ramp rates required to make big lift.
Equipped with smooth low friction rollers allowing for high revving capability perfect for any street, strip, circuit or hill climbing application. Precision CNC anodised cradle providing unsurpassed rocker stability eliminating premature valve train wear and radically reducing side loading.
Reliable at high RPM with huge needle roller bearings. Your engine will run cooler, smoother and quieter.
100% Australian manufactured and designed, the ultimate go-fast-bit for the legendary Chrysler Slant 6 170, 198 or 225!
Key Features:
- The YT 6709 Rockers are an easy fit Bolt on with no machining required.
- New CNC Machined RIDGEBACK rocker body for added strength in Hi-RPM Applications 1.5 Ratio
- Tool steel Pin & Roller
- Made in USA Torrinton BEARINGS
- Chrome Moly Cup lash adjustment screws with Blackened 12 Point Nuts
- channel pressurised oil from shaft to the pushrod cup to the shaft bearings and then on to the roller tip.
- 7/16” adjuster screw and heat-treated alloy steel jam nut to positively secure lash settings.
- Each adjuster is broached for a big 3/16" socket to eliminate twisted hex keys.
- Larger diameter shafts are made from 4130 steel, deep case hardened and tempered for maximum wear resistance and strength.
- Aluminum rocker bodies use new 2000 aluminum made to our specifications for improved tensile and yield strength, and increased notch sensitivity, fatigue resistance, strength at elevated temperatures and chemical resistance.
Kit contains:
- 12 all new 1.5 Ratio RIDGEBACK arms Fully assembled with X Hole HD Lash adjusters & 12 Point Nuts, Torrington Bearings, and specifically ground Roller Tips
- 2 Specifically designed and ground shafts with Oil galleries machined for perfect lubrication
- Blackend Spacers & Washers to complete the assembly
- Assembled and ready for pre-lubrication and installation.
| PART NO | YT 6711 |
| BRAND | PLATINUM |
| APPLICATION | RACE/STRIP |
| MAX OPEN SPRING PRESSURE | <900lbs |
| MAKE | CHRYSLER |
| ENGINE | SLANT 6 - 170, 198, 225 |
| MOUNTING STYLE | MODULAR SHAFT |
| ROCKER ARM RATIO | 1.5:1 |
| STUD SIZE | FACTORY |
| ADJUSTABLE/HYDRAULIC | ADJUSTABLE |
| ROCKER MATERIAL | ALUMINIUM |
| ROCKER ARM BODY STYLE | CNC BILLET |
NOTES:
- TOTAL ROCKER SYSTEM INC. PEDESTALS, SHAFT & ARMS
- YT 6711 & YT 6709 Rockers WILL NOT FIT the original Shafts
- Both kits include Shafts designed and manufactured in house far exceeding the capabilities of the original Chrysler design.
- Requires 5/16" Ball End Pushrods
- Will require custom made ball end pushrods to suit your application .
- Additional Parts Available: H/D Billet 3/8" Shaft Caps - YT 18199 - not included in set.
Additional Parts Available: H/D Billet 3/8" Shaft Caps - YT 18199 - not included in set (Pictured below)
Featured on Powernation Builds
Turbocharged Mopar 225 Slant 6 with Custom EFI Makes Big Pump-Gas Power - Engine Power S10, E9
Mopar Slant 6 Roller Rockers as Featured in PowerHouse Engines Australia
