null

1.9 RATIO 8MM ADJ SHAFT MOUNT Chevrolet V8 LS7/LSX Ultralite Pro Roller Rockers (YT 6717A)

Write a Review
$1,386.00
SKU:
YT 6717A
Weight:
5.00 KGS
Shipping:
Calculated at Checkout
Ask a Question or Enquire Here

Pro Street

Designed for high revving street/strip applications. No other comparable product can compete with 600lbs* maximum open spring pressure whilst retaining factory size bolt-down hardware.

Manufactured and assembled in Australia using the highest quality materials and componentry consistent with those found in our Platinum race series.

Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift. 

Ideal for harsh street and strip applications, these rockers have got what it takes to last!

Why Choose Pro Street?

  • Built to withstand 600lbs* max open spring pressure
  • Oversize full-complement caged bearings designed for oscillating (rocking) loads, paired with oversize precision ground trunnions to reduce friction.
  • Intricately balanced CNC billet arms ensuring vital valvetrain stability - focusing attention on the harmony of the entire engine.
  • Extruded from aircraft grade aluminium, perfect for dissipating excess top-end heat.
  • Proven bolt-on shaft mount design that mounts both inlet/exhaust to common shaft, effectively increasing footprint and clamp load twofold without any further cylinder head modification.
  • Various ratios available, catering for every camshaft grind. High ratios allow for additional lift on stock and aftermarket camshafts.
  • Chrome moly steel hardened and ground roller tips of generous diameter (positively retained by internal circlip) preventing abrasion of valve tips and guides commonly seen with non-roller tip rockers. Allows for smoother, quieter operation. Maintains lash and reduces necessary and tedious engine maintenance.

Please Note: Due to inconsistencies in GM castings, these rockers may require clearancing on the heads in the locations pictured. YT 5123 25mm rocker cover spacers are also required.

Also note: Includes D Saddles - must be used to ensure correct radial fitment of the rocker shaft into the cradle of the factory LS7 cylinder head. Some LS7 cylinder heads have variations in rocker post machining and may require further relief to clear bottom of the Yella Terra rocker. Special instructions included.

Tech spec:

PART NO YT 6717A
BRAND PRO STREET
APPLICATION FACTORY REPLACEMENT/STREET
MAX OPEN SPRING PRESSURE
480lbs
MAKE CHEVROLET 
ENGINE LS7/LSX
MOUNTING STYLE STUD MOUNT
ROCKER ARM RATIO 1.9
STUD SIZE 8mm
ADJUSTABLE/HYDRAULIC ADJUSTABLE
ROCKER ARM STYLE FULL ROLLER
ROCKER MATERIAL ALUMINIUM
ROCKER ARM BODY STYLE STANDARD
ROCKER ARM NUT STYLE M8 STUD & 12 POINT LOCK NUT
MAX SPRING DIAMETER 1.437"
INLET OFFSET YES
QTY SET OF 16
NOTE INCLUDES 8MM STUDS / D SADDLES / SHIMS 

 

 

Pro Street

Designed for high revving street/strip applications. No other comparable product can compete with 600lbs* maximum open spring pressure whilst retaining factory size bolt-down hardware.

Manufactured and assembled in Australia using the highest quality materials and componentry consistent with those found in our Platinum race series.

Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift. 

Ideal for harsh street and strip applications, these rockers have got what it takes to last!

Why Choose Pro Street?

  • Built to withstand 600lbs* max open spring pressure
  • Oversize full-complement caged bearings designed for oscillating (rocking) loads, paired with oversize precision ground trunnions to reduce friction.
  • Intricately balanced CNC billet arms ensuring vital valvetrain stability - focusing attention on the harmony of the entire engine.
  • Extruded from aircraft grade aluminium, perfect for dissipating excess top-end heat.
  • Proven bolt-on shaft mount design that mounts both inlet/exhaust to common shaft, effectively increasing footprint and clamp load twofold without any further cylinder head modification.
  • Various ratios available, catering for every camshaft grind. High ratios allow for additional lift on stock and aftermarket camshafts.
  • Chrome moly steel hardened and ground roller tips of generous diameter (positively retained by internal circlip) preventing abrasion of valve tips and guides commonly seen with non-roller tip rockers. Allows for smoother, quieter operation. Maintains lash and reduces necessary and tedious engine maintenance.

Please Note: Due to inconsistencies in GM castings, these rockers may require clearancing on the heads in the locations pictured. YT 5123 25mm rocker cover spacers are also required.

Also note: Includes D Saddles - must be used to ensure correct radial fitment of the rocker shaft into the cradle of the factory LS7 cylinder head. Some LS7 cylinder heads have variations in rocker post machining and may require further relief to clear bottom of the Yella Terra rocker. Special instructions included.

Tech spec:

PART NO YT 6717A
BRAND PRO STREET
APPLICATION FACTORY REPLACEMENT/STREET
MAX OPEN SPRING PRESSURE
480lbs
MAKE CHEVROLET 
ENGINE LS7/LSX
MOUNTING STYLE STUD MOUNT
ROCKER ARM RATIO 1.9
STUD SIZE 8mm
ADJUSTABLE/HYDRAULIC ADJUSTABLE
ROCKER ARM STYLE FULL ROLLER
ROCKER MATERIAL ALUMINIUM
ROCKER ARM BODY STYLE STANDARD
ROCKER ARM NUT STYLE M8 STUD & 12 POINT LOCK NUT
MAX SPRING DIAMETER 1.437"
INLET OFFSET YES
QTY SET OF 16
NOTE INCLUDES 8MM STUDS / D SADDLES / SHIMS